Grid-Connected Battery Storage Systems Design Only

$1,595.00

Self-paced Online Course

The Grid-Connected Battery Storage System Design Only course is designed for grid-connected photovoltaic system designers who wish to further their skills by being able to incorporate battery storage systems. The delivery mode of this course is designed for busy tradespeople and professionals who do not have the time to attend lengthy face-to-face courses to expand their knowledge and skills: the fully flexible web-based format of the online component allows students to complete the theory in their own time.

To enrol in this course, you must have previously successfully completed an approved Grid-connected PV Systems Design course (see ‘Prerequisites’ section for more information). GSES is a Nationally Recognised Registered Training Organisation (RTO Code 91461), and students who successfully complete all components of the course will receive a Statement of Attainment for the units of competency UEERE0054 and UEERE0060. This meets the training component of the Solar Accreditation Australia’s requirements for Battery Storage Design Accreditation for SAA Grid-connect accredited designers;

Please read the essential Course Information and Policies before purchasing this course.

FREQUENTLY ASKED QUESTIONS

GET MORE INFORMATION

Prerequisites

This course builds on the knowledge of the Grid-Connected PV Systems Design only course, so a prerequisite for enrolment is a Statement of Attainment in the following Unit of Competency:

  • UEERE0061: Design grid-connected photovoltaic power supply systems

If a student does not have a Statement of Attainment in UEERE0061 but does have a Statement of Attainment in any of the following superseded Units of Competency, they will be enrolled in gap assessment for UEERE0061 at no additional cost:

  • UEERE0011: Design grid-connected photovoltaic power supply systems
  • UEENEEK135A: Design grid connected photovoltaic power supply systems
  • UEENEEK035C: Design grid connected power supply systems
  • UEENEEK035B: Design grid connected power supply systems
Training Outcome

Successful completion will result in the award of a Statement of Attainment in the following Units of Competency:

  • UEERE0054 – Conduct site survey for grid-connected photovoltaic and battery storage systems
  • UEERE0060 – Design grid-connected battery storage systems

Upon successful completion of the course, students will be eligible to apply to Solar Accreditation Australia for Design Battery Storage Accreditation. Solar Accreditation Australia has information on their website indicating their requirements to apply for SAA Accreditation: https://saaustralia.com.au/about-accreditation/.

Materials and Equipment

Students can choose between options of an online e-Book or a printed copy of the publication Battery Storage Systems for Grid-Connected PV Systems 2nd Edition as part of enrolment; if a student wants a printed hard copy they must pay an additional fee for printing and shipping the textbook. Students are responsible for obtaining current copies of the following Australian Standards, available for purchase from the SAI Global website or Techstreet website, and also available from some libraries, institutions and industry associations:

  • AS/NZS 5139 – Electrical installations – Safety of battery systems for use with power conversion equipment
  • AS/NZS 4777.1 – Grid connection of energy systems via inverters – Part 1: Installation requirements
  • AS/NZS 5033 – Installation and safety requirements for photovoltaic (PV) arrays
  • AS/NZS 3000 – Wiring Rules
  • AS/NZS 3008.1.1 – Electrical installations – Selection of cables

Students will also require the following:

  • Computer with a reliable Internet connection
  • Scientific calculator
  • Email account, checked regularly
Delivery Method and Duration

This course is delivered online at students’ own pace. The course is nominally 110 hours of training, including the online assessments and design task, but students may take more or less time to complete the course. Courses are valid for twelve (12) months. Extension fees apply from the date of expiry, and the maximum extension permitted is six (6) months from the date of expiry.

GSES has a team of tutors who mark the online work and as necessary supply feedback or additional technical information to the students. GSES’s tutors are also available to be contacted by phone during business hours or email.

Student Rights and Responsibilities

As a registered training organisation (RTO) GSES complies with the Standards set out by the regulator, the Australian Skills Quality Authority (ASQA), for Vocational Education Training (VET).

GSES will inform students within 30 days of any changes to services provided to them. This includes any changes to education and support services, any change in the RTO ownership or to third party arrangements.

GSES maintains an adult workplace. We do not countenance any behaviour that is contrary to safe work practice. We do not countenance inappropriate language in all forms of communication. GSES asks that all persons treat others with respect.

Cheating will not be tolerated. If detected, sanctions may be implemented at the discretion of GSES. Students are required to ensure that all responses and/or work they submit is their own work. Any referenced material should be annotated as to its origin. Sanctions may be implemented at the discretion of GSES if plagiarism or fraud is detected, including revocation of certification.

All GSES course participants have the right to appeal the results they obtain in assessments and examinations. The appeal should be sent in writing to the RTO Chief Executive Officer (CEO) who will review the result and respond in writing. GSES may use mediation and conciliation to resolve the complaint. Students also have the right to engage a suitably qualified independent assessor.

Cancellation and Refunds

Cancellation of online training courses will be subject to the following conditions:

  • If the student’s Learning, Literacy and Numeracy (LLN) levels are determined by GSES to be below the standard required to complete the coursework successfully, and the student has not yet submitted coursework for assessment, GSES may offer a full refund of the online course material and practical training component. If the student then opts to continue with the course, the standard cancellation and refund policy applies.
  • Cancellation of online training courses made within fourteen (14) days of the date of payment AND before the online course has been accessed: the student will receive a full refund of the online course payment.
  • Cancellation of online training courses made within fourteen (14) days of the date of payment AND after the online course has been accessed AND before any coursework has been submitted for assessment: the student will receive a refund of the online course payment less a cancellation fee of $440, unless the value of the course is lower than this, in which case the student will receive no refund.
  • Cancellation more than fourteen (14) days after the date of payment OR after the first coursework is submitted for assessment (whichever occurs first): the student will receive no refund.
  • All course refunds are exclusive of the price of the printed course publication (if chosen) as advertised at the time of enrolment, unless the publication is returned to GSES in an undamaged and unused condition. GSES reserves the right to refuse a refund of the publication on the basis that goods are damaged or have been used prior to return.
  • The cost of an online training course is inclusive of the Practical Training Component (if applicable), as are course refunds.
Recognition of Prior Learning

In accordance with the Australian Quality Framework, GSES is committed to providing a quality recognition process to all students that is:

  • Fair
  • Flexible
  • Reliable
  • Valid

GSES will on request engage in a recognition of prior learning evaluation. GSES does not offer entry level VET sector training.

For more information on our Recognition of Prior Learning policy, please see the Course Information and Policies section 4.

Ensure this is the student's direct email, not a shared email address

Description

This course is designed for engineers and others working in the renewable energy industry who are accredited to design grid-connected photovoltaic systems and wish to further their skills to design grid-connected battery storage. The course is entirely online with tutor support via phone and email. Course access is valid for 12 months.

Prerequisites: Clean Energy Council (CEC) Grid-connect Design Accreditation, or certificate of completion equivalent to UEENEEK125A and UEENEEK135A (e.g. the GSES Grid-Connected PV Systems Design Only course). Grid-Connected PV System Design is considered as ‘required prior learning’ for this course.

This course is only classified as Nationally Recognised Training for students who have a Statement of Attainment for UEENEEK135A.

Outcome of successful completion: Certificate of completion equivalent to the following Unit of Competency and eligible to apply for CEC Battery Storage Design Accreditation (refer to the CEC for any additional requirements).

  • UEERE5001: Design battery storage systems for grid connected photovoltaic systems

Students who have a Statement of Attainment for the prerequisite unit UEENEEK135A will receive a Statement of Attainment for UEERE5001.

Required materials: Students are supplied with the publication Battery Storage Systems for Grid-Connected PV Systems 2nd Edition after enrolment at no additional cost. Students are responsible for obtaining current copies of the following Australian Standards, available for purchase from the SAI Global website or Techstreet website, and also available from some libraries, institutions and industry associations:

  • AS/NZS 5139 – Electrical installations – Safety of battery systems for use with power conversion equipment
  • AS/NZS 4777.1 – Grid connection of energy systems via inverters – Part 1: Installation requirements
  • AS/NZS 5033 – Installation and safety requirements for photovoltaic (PV) arrays

Students will also require the following:

  • Computer with reliable Internet connection
  • Scientific calculator
  • Email account, checked regularly