Grid-Connected PV Systems Install Only

$1,995.00

Self-paced online with 2 days face-to-face

The GSES Grid-Connected Photovoltaic Systems Install Only course consists of two main components:

  1. Online theory completed at students’ own pace with tutor support.
  2. A face-to-face (2 days) practical component held at a GSES Training Facility. Practical sessions for this course are held monthly in Western Sydney.

The delivery mode of this course is designed for busy tradespeople who do not have the time to attend lengthy face-to-face courses to expand their knowledge and skills: the fully flexible web-based format of the online component allows students to complete the theory in their own time.


To enrol in this course, you must be a licensed electrician or electrical apprentice.

GSES is a Nationally Recognised Registered Training Organisation (RTO Code 91461), and students who successfully complete all components of the course will receive a Statement of Attainment for the units of competency UEERE0054, UEERE0080 and UEERE0081. This meets the training component of SAA’s requirements for Grid-connect Install Provisional Accreditation.

Please read the essential Course Information and Policies before purchasing this course.

FREQUENTLY ASKED QUESTIONS

GET MORE INFORMATION

Prerequisites

An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course. Electrical apprentices may enrol in this course, however they will need to wait till until they are issued their unrestricted licence before being awarded a Statement of Attainment OR show they have completed the prerequisite Unit of Competency in their studies already:

  • UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories
Training Outcome

Successful completion will result in the award of a Statement of Attainment in the following Units of Competency:

  • UEERE0054 – Conduct site survey for grid-connected photovoltaic and battery storage systems
  • UEERE0080 – Install photovoltaic power conversion equipment to grid
  • UEERE0081 – Install photovoltaic systems to power conversion equipment

Upon successful completion of the course, students will be eligible to apply to Solar Accreditation Australia for the Installation of Grid-Connect PV Systems Accreditation. Solar Accreditation Australia has information on their website indicating their requirements to apply for SAA Accreditation: https://saaustralia.com.au/about-accreditation/

Materials and Equipment

Students can choose between options of an online e-Book or a printed copy of the publication Grid-Connected PV Systems Design and Installation 8th Edition as part of enrolment; if a student wants a printed hard copy they must pay an additional fee for printing and shipping the textbook. Students are responsible for obtaining current copies of the following Australian Standards, available for purchase from the SAI Global website or Techstreet website, and also available from some libraries, institutions and industry associations:

  • AS/NZS 5033 – Photovoltaic arrays
  • AS/NZS 4777.1 – Grid connection of energy systems via inverters
  • AS/NZS 3000 – Wiring rules
  • AS/NZS 3008.1.1 – Selection of cables Part 1.1

Students will also require the following:

  • Computer with a reliable Internet connection
  • Scientific calculator
  • Email account, checked regularly
Delivery Method and Duration

This course uses two delivery methods: online theory completed at students’ own pace and the 2-day face-to-face component held at a GSES Training Facility.

The course is nominally 120 hours of training, including the online assessments and 16 hours face-to-face, but students may take more or less time to complete the course. Courses are valid for twelve (12) months. Extension fees apply from the date of expiry, and the maximum extension permitted is six (6) months from the date of expiry.

Practical component: Approximately 60% of the online assessments must be completed before booking the face-to-face practical component. The confirmed date for the practical component is only available once a student has completed the necessary online assessments, used the online link to select a date, and received a confirmation email from GSES. Practicals are held in Chullora – NSW and scheduled dates can be viewed here. Note that dates are subject to minimum and maximum numbers, and places cannot be guaranteed until the necessary amount of online work is completed.

Student Rights and Responsibilities

As a registered training organisation (RTO) GSES complies with the Standards set out by the regulator, the Australian Skills Quality Authority (ASQA), for Vocational Education Training (VET).

GSES will inform students within 30 days of any changes to services provided to them. This includes any changes to education and support services, any change in the RTO ownership or to third party arrangements.

GSES maintains an adult workplace. We do not countenance any behaviour that is contrary to safe work practice. We do not countenance inappropriate language in all forms of communication. GSES asks that all persons treat others with respect.

Cheating will not be tolerated. If detected, sanctions may be implemented at the discretion of GSES. Students are required to ensure that all responses and/or work they submit is their own work. Any referenced material should be annotated as to its origin. Sanctions may be implemented at the discretion of GSES if plagiarism or fraud is detected, including revocation of certification.

All GSES course participants have the right to appeal the results they obtain in assessments and examinations. The appeal should be sent in writing to the RTO Chief Executive Officer (CEO) who will review the result and respond in writing. GSES may use mediation and conciliation to resolve the complaint. Students also have the right to engage a suitably qualified independent assessor.

Cancellation and Refunds

Cancellation of online training courses will be subject to the following conditions:

  • If the student’s Learning, Literacy and Numeracy (LLN) levels are determined by GSES to be below the standard required to complete the coursework successfully, and the student has not yet submitted coursework for assessment, GSES may offer a full refund of the online course material and practical training component. If the student then opts to continue with the course, the standard cancellation and refund policy applies.
  • Cancellation of online training courses made within fourteen (14) days of the date of payment AND before the online course has been accessed: the student will receive a full refund of the online course payment.
  • Cancellation of online training courses made within fourteen (14) days of the date of payment AND after the online course has been accessed AND before any coursework has been submitted for assessment: the student will receive a refund of the online course payment less a cancellation fee of $440, unless the value of the course is lower than this, in which case the student will receive no refund.
  • Cancellation more than fourteen (14) days after the date of payment OR after the first coursework is submitted for assessment (whichever occurs first): the student will receive no refund.
  • All course refunds are exclusive of the price of the printed course publication (if chosen) as advertised at the time of enrolment, unless the publication is returned to GSES in an undamaged and unused condition. GSES reserves the right to refuse a refund of the publication on the basis that goods are damaged or have been used prior to return.
  • The cost of an online training course is inclusive of the Practical Training Component (if applicable), as are course refunds.
Recognition of Prior Learning

In accordance with the Australian Quality Framework, GSES is committed to providing a quality recognition process to all students that is:

  • Fair
  • Flexible
  • Reliable
  • Valid

GSES will on request engage in a recognition of prior learning evaluation. GSES does not offer entry level VET sector training.

For more information on our Recognition of Prior Learning policy, please see the Course Information and Policies section 4.

Ensure this is the student's direct email, not a shared email address

Description

This course is designed for electricians who wish to further their skills by learning to install (but not to design) grid-connected photovoltaic systems (not stand alone power systems). The majority of the course is completed online; students can book the dates for their 2 day face-to-face practical after attempting a certain proportion of the online work. Practical sessions are held regularly in Sydney and the current schedule can be found at this link. Note that dates are subject to minimum and maximum numbers, and places cannot be guaranteed until the necessary amount of online work is completed. Course access is valid for 12 months.

Prerequisites: Unrestricted electrical licence issued by an Australian state or territory. Electrical apprentices may enrol but will not be awarded a Statement of Attainment until they can show they have completed the prerequisite units, and will not be able to apply for their Provisional Accreditation until they have their unrestricted licence.

Outcome of successful completion: Statement of Attainment for the following Units of Competency and eligible to apply for CEC Grid-connect install provisional accreditation (refer to the CEC for any additional requirements).

UEENEEK125A: Solve basic problems in photovoltaic energy apparatus and systems
UEENEEK148A: Install, configure and commission LV grid connected photovoltaic power systems

Required materials: Students are supplied with the publication Grid-Connected PV Systems Design and Installation 8th Edition after enrolment at no additional cost. Students are responsible for obtaining current copies of the following Australian Standards, available for purchase from the SAI Global website or Techstreet website, and also available from some libraries, institutions and industry associations:

AS/NZS 5033 – Photovoltaic arrays
AS/NZS 4777.1 – Grid connection of energy systems via inverters
AS/NZS 3000 – Wiring rules
AS/NZS 3008.1.1 – Selection of cables Part 1.1

Students will also require the following:

Computer with reliable Internet connection
Scientific calculator
Email account, checked regularly