Installation Introduction for Designers

$0.00

This is an extension course developed principally for engineers, CEC accredited designers or those who hold equivalent basic electrical units and wish to get hands on experience of grid connected photovoltaic system installation. This is a one day, face to face, non-accredited training course to allow participants to experience a real installation.

This course comprises a short introductory session on site considerations, followed by a hands on practical session to install a real system (de-energized). You will be trained by a CEC accredited, licensed electrician with many years of experience in Solar Industry. This course will give you an insight of all the things required to carry out an actual installation, commissioning, testing and basic fault finding.

This course will be held at the GSES Training Facility in Sydney.

Note: All Practical sessions subject to minimum numbers, GSES will give appropriate notice to any changes.

GSES will publish the next set of training dates once there is sufficient interest. Please contact us to express your interest in attending.

Variants and Options

The bulk of the practical installation is performed on de-energised (not live) system components. As this will ultimately be an energised system, any Low Voltage electrical installation work can only be done by a licensed electrician, however once Low Voltage electrical work is complete, non-electricians will then participate in the remainder of the practical training.

Prerequisites

Recommended Knowledge

  • Familiarity with Work Health and Safety
    The course will provide a site relevant overview
  • Knowledge of basic electrical units
    This will not be taught in the course
  • Familiarity of standards such as AS/NZS 5033:2014
    This will be discussed during the installation, but not taught.

Alternatively you can enrol in GSES Grid-Connected PV Systems Design Only course then participate in this extension course.

Additional Information
Weight 0.001 kg
Dimensions 1 × 1 × 1 cm
Select session time

TBA

Out of stock

Description

PREREQUISITE

While there are no formal prerequisites for the course, we advise you to have;

Recommended knowledge
Notes

Familiarity with Work Health and Safety
The course will provide a site relevant overview

Knowledge of basic electrical units
This will not be taught in the course

Familiarity of standards such as AS/NZS 5033:2014
This will be discussed during the installation, but not taught.

Alternatively you can enrol in GSES GCPV Design Only course then participate in this extension course.

NOTE: The bulk of the practical installation is performed on de-energised (not live) system components. As this will ultimately be an energised system, any Low Voltage electrical installation work can only be done by a licensed electrician, however once Low Voltage electrical work is complete, non-electricians will then participate in the remainder of the practical training.

Additional information

Weight 0.001 kg
Dimensions 1 × 1 × 1 cm
Select session time

TBA